First, the installation steps of automatic soldering machine:
1. Put the automatic soldering machine on the dry, stable and non-corrosive workbench.
2. When using the automatic soldering machine with power supply, make sure that the working power supply voltage meets the requirements of the machine.
3. When the automatic soldering machine is working, put the soldering iron into the soldering iron frame, insert the power plug, and turn on the temperature control switch.
4. According to the needs of the product, select the appropriate conduit into the fixed pipe hexagonal column, and then tighten with screws.
5. The foot switch should be placed where the foot is easy to operate.
6. Put the tin wire in the tin seat and introduce the tin guide.
Automatic soldering machine must pay attention to maintenance when using, which can extend the service life of the machine. There are several suggestions for the maintenance of automatic soldering machine:
1. Do not put corrosive substances such as salt, acid and alkali on the automatic soldering machine.
2. Wipe the automatic soldering machine with a dry cloth before going to work every day.
3. When the automatic soldering machine is not used for a long time, unplug the power plug to prevent the machine from burning out for too long.
4. Before going to work every day, wipe off the residue such as excess tin slag on the tip with sponge and unplug the power plug.
5. Parts on the automatic soldering machine cannot be forcibly removed.
6, can not destroy the automatic soldering machine and soldering iron device.
7. Non-professional maintenance personnel should not open the machine privately.