Automatic soldering machine manufacturers: automatic soldering machine requirements for the use environment
The suitable working environment can improve the working efficiency and service life of the soldering robot. The requirements of the automatic soldering machine for the use environment are as follows:
1. Requirements for basic conditions such as power supply and gas source;
2. Ensure that the machine is grounded and the resistance to ground is less than 1 ohm;
3. Automatic soldering machine manufacturers please provide stable and sturdy bearing surface;
4. Ensure that the X and Y axes move and the horizontal plane, the axis inclination angle is less than 3 degrees;
5. Do a good job of dustproof and waterproof. The protection level of this series of machine covers is IECIP31.
The automatic soldering machine should also pay attention to the safety of use. When the automatic soldering machine manufacturer works, the warning label on the machine should not touch the high temperature parts when the machine is working. The tin beads generated during the welding process may enter the machine and cause short circuit of the electrical circuit. It should be cleaned up in time and the corresponding preventive measures should be taken.